Reach out to us for an assessment of your project and to receive a personalized quote tailored to your needs.
GP-Divider
2-way GNSS signal splitter with SMA connectors
1 port DC pass, 1 port DC block with 330Ω load. Perfect for time servers with antenna preamplifier current measurement
Contact Us for Project Evaluation
Reseller Directory
Choose from our trusted distributors to enjoy personalized service, expert advice, and compliance with regional standards for a seamless buying experience.
Specification
RF Parameters
| Frequency Range: | 1.164 GHz – 1.61 GHz |
| VSWR: | In: 1.40:1 typ., Out: 1.3:1 typ. |
| Max RF Input Power: | 1.5W |
| Insertion Loss: | 0.7 dB |
| Isolation: | 20 dB typ. |
GNSS Antenna Ports
| Connector Input: | SMA(F) |
| Connector OUT1: |
SMA(M) |
| Connector OUT2: |
SMA(F) |
| Impedance: | 50 Ω |
| Antenna bias voltage: | 50 VDC Max Through OUT 1 to Antenna Input |
| OUT 2 Load: | 330 Ohm resistance load 12 VDC Max DC blocked |
Mechanical
| Housing: | Aluminum |
| Size: | 46.0 x 28.5 x 8.0 mm |
| Weight: | 40 g |
Environmental
| Operational Temperature: | -40°C to +50°C |
| Storage Temperature: | -50°C ~ +85°C |
| Humidity: | 0% – 95% RH non-condensing @ 40°C |
| Vibration and Shock: | 15g/0.53oz, 11ms half-sine wave |
| Vibration: | 10 – 55 Hz/0.07g, 55 – 500 Hz/1.0g |
Regulatory Compliance
CE | RoHS
Warranty & Support
| Warranty: | 1 year Extended warranty is available |
| Support: | 1 year of complimentary technical support |
Package Content
| GP-Divider: | 1 pc. |
Ordering Information
GP-Probe model number definition
PPS
PPS input, PPS output, PPS phase measurement module.
BL
GNSS output, embedded RF blocker.
RL
NO-C-NC Relay, RS232 port.
SCR
Display and keypad.
GP-Probe DIN L1 Software Options
GP-Probe OSP
Onboard signal processing for spoofing detection.
The GP-Probe can work without connecting to the GP-Cloud servers.
GP-Probe LUA
Develop custom scenarios for external equipment remote control via RS232/Telnet/SSH with the embedded LUA scripting engine.
Optional Accessories
GP-Divider
GNSS power divider with GNSS antenna preamplifier current simulation. It allows you to use one GNSS antenna for two receivers at once.
GP-A-DOME
Dome antenna.
BeiDou, Galileo, GLONASS, GPS.
Panel Mount, IP67
GP-C-010
10 m RG58 Cable
GP-C-050
50 m LMR195 Equivalent Cable
GP-C-100
50 m LMR195 Equivalent Cable
GP-SPP
A multi-strike maintenance-free surge suppressor
GP-AMP-20
GNSS Amplifier – 20db